flow monitor G 1/2", 2 to 7 l/min, Nickel-plated brass

Application:
Flow monitors monitor a flow quantity that can be set. If this is exceeded or undershot, a contact gets actuated. A voltage supply is not necessary because of the potential-free reed contacts.

Materials:
Body: Brass nickel-plated or 1.4571, Spring: 1.4571, seals: FKM, Display: Polycarbonate / 1.4301

Temperature range:
-20 to +120 °C, Environment: max. +80 °C

Protection class:
IP 65

Measurement principle:
Spring loaded float

Installation position:
arbitrarily (preferred from bottom to top)

Direction of flow:
only in one direction

Electrical connection:
G 1/2": angle plug DIN 43650 / EN 175301-803 C (size 0C, 3-pole), G 1": angle plug DIN 43650 / EN 175301-803 A (size 3, 3-pole)

Switch type:
Closer (NO)

Switching capacity:
G 1/2": 230 V AC, 60 VA, max. 3 A / 230 V DC, 60 W, max. 3 A, G 1": 250 V AC, 100 VA, max. 5 A / 250 V DC, 100 W, max. 5 A

Media:
Oils and other fluids with 30 - 600 cSt viscosity (Option -W: water and aqueous media)

Optional:
for water as the medium and aqueous fluids -W

Advantages:
•Switching point does not have to be adjusted according to the medium and pressure.

Material	Nickel-plated brass
for medium	Oils
Switching range [l/min]	2 - 7
Thread	G 1/2"
PN [bar]	300

{{ $t('shop.all.gewicht') }}	310 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	90261081
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}